{"title":"UAD Volt Gen 2","description":null,"products":[{"product_id":"universal-audio-volt-1-gen-2","title":"Universal Audio Volt 1 Gen 2","description":"\u003cp\u003eThe Universal Audio Volt 1 Gen 2 is a compact, bus-powered USB-C audio interface with two inputs and two outputs, built around a single Tone Shaping mic\/line preamp. It is aimed at singer-songwriters and content creators who record one microphone at a time, either alone or together with a guitar or bass. This second-generation Volt 1 adds 32-bit\/192 kHz conversion, and three Tone modes replace the single Vintage preamp mode of the original.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTone Shaping preamp:\u003c\/strong\u003e up to 60 dB of gain on the rear XLR\/TRS combo input, with Warmth, Focus and Shine modes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32-bit conversion:\u003c\/strong\u003e sample rates from 44.1 kHz up to 192 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimultaneous recording:\u003c\/strong\u003e front Hi-Z instrument input and rear mic\/line input can be captured to separate tracks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect monitoring:\u003c\/strong\u003e latency-free monitoring of channel 1, channel 2 or both, with Tone Shaping included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoopback:\u003c\/strong\u003e mixes live inputs with computer audio for podcasts, livestreams and calls\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoftware:\u003c\/strong\u003e UAD Volt Studio Bundle with LUNA Free and more than 15 native UAD plug-ins and instruments\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe TONE button steps through Off and the three voicings, each shown by its own LED colour. Warmth is modelled on the tube character of the UA 610, Focus gives a punchy solid-state sound in the style of classic American consoles and suits drums, guitar and bass, and Shine adds a British Class-A colour with a smooth top end. Each mode also applies an EQ curve derived from analog hardware, and tones can be selected from the UAD Console app as well as the front panel.\u003c\/p\u003e\u003cp\u003eSwitchable +48V phantom power is available on the XLR and turns off automatically when a 1\/4 inch plug is connected. The front panel also has signal\/clip LEDs for both gain controls, a MUTE button for monitors and headphones, and separate monitor and headphone level knobs.\u003c\/p\u003e\u003cp\u003eThe Volt 1 Gen 2 runs class-compliant on Mac, iPad and iPhone, while Windows uses UA's ASIO driver installed through UA Connect. A second USB-C port accepts 5V power for hosts that cannot supply enough current, and Lightning devices need Apple's Lightning to USB Camera Adapter. The bundled software includes the 610 Tube Preamp and EQ Collection, Teletronix LA-2A, UA 1176, Pure Plate Reverb, Galaxy Tape Echo and Melodyne Essential, among others; UA notes the bundle is subject to change.\u003c\/p\u003e","brand":"Universal Audio","offers":[{"title":"Default Title","offer_id":55245020430675,"sku":"VOLT1G2","price":139.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1043\/4052\/1299\/files\/volt-1-gen-2-gallery-1.png?v=1791382350"},{"product_id":"universal-audio-volt-2-gen-2","title":"Universal Audio Volt 2 Gen 2","description":"\u003cp\u003eThe Universal Audio Volt 2 Gen 2 is a compact, bus-powered USB-C audio interface with two inputs and four outputs. It suits recording vocals and instruments at home or on the road, two-person sessions, podcasts and streaming, and it is a sensible first interface. It replaces the original Volt 2 and adds 32-bit\/192 kHz conversion, three tone modes and a colour display.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-in\/4-out at 32-bit\/192 kHz:\u003c\/strong\u003e two mic\/line combo inputs, a stereo monitor output and a headphone output with its own cue mix\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTone Shaping preamps:\u003c\/strong\u003e two preamps with 60 dB of digitally controlled gain and three modes, Warmth, Focus and Shine, set separately for each channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-Gain with Clip Protection:\u003c\/strong\u003e sets input levels for you and guards against overloads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePer-channel 48V phantom power\u003c\/strong\u003e and two front-panel Hi-Z instrument inputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in loopback\u003c\/strong\u003e for podcasting and live streaming\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUAD Volt Studio Bundle:\u003c\/strong\u003e LUNA Free plus UAD Native plug-ins such as the LA-2A, 1176, Pure Plate and Galaxy Tape Echo\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe three tone modes each draw on a different circuit. Warmth is modelled on UA's 610 tube preamp, Focus on an American solid-state console and Shine on British Class-A designs. Because each channel has its own mode, you can track a vocal through one mode and a guitar through another in the same take. The colour of the ring around the display shows which mode is active, and direct monitoring includes the tone processing, so what you hear while tracking matches what you record.\u003c\/p\u003e\u003cp\u003eOne push encoder handles gain, volume, mute, channel linking and the Clip Protection menu. Next to it are dedicated buttons for TONE, 48V, INPUT, AUTO, DIRECT and Monitor\/Headphone. Hold INPUT to link both channels as a stereo pair, or hold AUTO to run Auto-Gain across all inputs. Plugging a guitar or bass into a front Hi-Z jack overrides the rear combo jack on that channel and turns its phantom power off. For amp-modelling plug-ins, UA suggests setting gain to 0 rather than using Auto-Gain on the instrument inputs.\u003c\/p\u003e\u003cp\u003eThe Volt 2 Gen 2 is class-compliant on Mac, iPad and iPhone. On Windows it runs with the ASIO driver from UA Connect. It draws power over USB and also has a separate USB-C power input. UAD Console and LUNA give you session recall and low-latency cue mixes. A Kensington security port is built in. If you need optical input, MIDI or a second headphone output, look at the Volt 2 Max instead.\u003c\/p\u003e","brand":"Universal Audio","offers":[{"title":"Default Title","offer_id":55245025837395,"sku":"VOLT2G2","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1043\/4052\/1299\/files\/volt-2-gen-2-gallery-1.png?v=1791382359"},{"product_id":"universal-audio-volt-2-max","title":"Universal Audio Volt 2 Max","description":"\u003cp\u003eThe Universal Audio Volt 2 Max is a USB bus-powered desktop audio interface with 10 inputs, 4 outputs and 32-bit\/192 kHz conversion. It is built for recording vocals, guitar and bass at home or on the move, for producers working with MIDI hardware, and for podcasting and livestreaming. It is the two-preamp Volt with real-time compression inside the unit, and it replaces the Volt 276.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTone Shaping Preamps:\u003c\/strong\u003e two mic preamps with 60 dB of gain and three character modes, Warmth (tube), Focus (solid state) and Shine (British Class A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Processing:\u003c\/strong\u003e onboard compression with six push-button presets for vocals, guitar and bass, based on the 1176 and LA-2A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmart Display:\u003c\/strong\u003e full-colour screen showing inputs, levels, settings and gain reduction, plus Auto-Gain and Clip Protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpansion:\u003c\/strong\u003e optical input for ADAT or S\/PDIF adds up to 8 digital channels, alongside MIDI In\/Out and a USB hub that can power MIDI controllers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitoring and streaming:\u003c\/strong\u003e two headphone outputs sharing one cue mix, a built-in talkback mic and loopback\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCombining the three preamp modes with the six compressor presets gives 18 or more starting points, so you can shape a source on the way in without opening a plug-in. Each of the two mic\/line combo inputs has its own 48V phantom switch, and two front-panel Hi-Z inputs take guitar or bass directly.\u003c\/p\u003e\u003cp\u003eCompared with the Volt 2 Gen 2, the Max adds Max Processing, gain-reduction metering, the optical input, MIDI, the USB hub, the talkback mic and a second headphone output. It works with the UAD Console app and LUNA for session recall and low-latency cue mixes, and UAD Native plug-ins run on the computer's processor without DSP hardware. The interface is class-compliant on Mac, iPad and iPhone, with an ASIO driver for Windows via the UA Connect app. A separate USB-C power input is provided for hosts that cannot supply enough bus power.\u003c\/p\u003e\u003cp\u003eThe UAD Volt Studio Bundle is included, with software such as LUNA, Teletronix LA-2A, UA 1176 Classic FET, Melodyne Essential and the Ampeg SVT-VR Classic Bass Bundle; UA notes that the bundle contents may change.\u003c\/p\u003e","brand":"Universal Audio","offers":[{"title":"Default Title","offer_id":55245034750291,"sku":"VOLT2MAX","price":299.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1043\/4052\/1299\/files\/volt-2-max-gallery-1.png?v=1791382859"},{"product_id":"universal-audio-volt-4-max","title":"Universal Audio Volt 4 MAX","description":"\u003cp\u003eThe Universal Audio Volt 4 Max is a 12-in \/ 6-out desktop USB audio interface with 32-bit \/ 192 kHz conversion, part of UA's second-generation Volt range. It pairs two tone-shaping mic preamps and compression built into the hardware with monitor-controller features, so it suits home and project studios that track vocals and instruments together, record other musicians, connect outboard and MIDI gear, or run podcasts and streams.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Tone Shaping Preamps\u003c\/strong\u003e with 60 dB of gain and three character modes: Warmth (based on the UA 610 tube preamp), Focus (American solid-state console) and Shine (British Class-A circuitry)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Processing\u003c\/strong\u003e compression in the interface itself, with six push-button presets for vocals, guitar and bass based on 1176 and LA-2A styles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitor control\u003c\/strong\u003e with Main\/Alt switching for two pairs of speakers, a built-in talkback mic and two headphone outputs (1\/4\" and 1\/8\") sharing one cue mix\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpansion\u003c\/strong\u003e through an optical input for ADAT or S\/PDIF (up to eight extra channels), line inputs and outputs 3-4 for outboard gear, and MIDI In\/Out on 1\/8\" TRS (Type A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB hub port\u003c\/strong\u003e that can power a USB MIDI controller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmart Display\u003c\/strong\u003e in full colour, showing inputs, levels, settings and gain-reduction metering\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe three preamp modes and six compressor presets combine into 18 different tones, and because the shaping and compression happen in the hardware, you can commit a sound on the way in rather than relying on plug-ins at the tracking stage. Front-panel access includes two mic\/line combo inputs and two Hi-Z instrument inputs, with 48V phantom power switchable per channel. Auto-Gain and Clip Protection help set safe levels quickly.\u003c\/p\u003e\u003cp\u003eFor content work, built-in loopback mixes live sources with computer audio for podcasts, livestreams and video calls. The Volt 4 Max works with the UAD Console app and LUNA, including session recall and low-latency cue mixes, and supports UAD Native plug-ins that run on the host computer; the unit has no onboard DSP. It is class-compliant on Mac, iPad and iPhone, while Windows uses UA's ASIO driver. Power comes over USB, and a 3 A USB power supply is included for setups with monitors and powered USB devices. The Volt 4P Max sister model offers the same I\/O with four mic preamps instead of two.\u003c\/p\u003e","brand":"Universal Audio","offers":[{"title":"Default Title","offer_id":55245059457363,"sku":"VOLT4MAX","price":399.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1043\/4052\/1299\/files\/volt-4-max-gallery-1.png?v=1791382266"},{"product_id":"universal-audio-volt-4p-max","title":"Universal Audio Volt 4P MAX","description":"\u003cp\u003eThe Universal Audio Volt 4P MAX is a 12-in\/6-out desktop USB audio interface and the flagship of UA's Volt range. With four mic preamps, optical expansion and studio-style monitor control, it is built for recording several sources at once: a full band, a compact drum kit, podcasts with up to four people in the room, or a livestream. UA positions it as the four-preamp successor to the Volt 476P.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Tone Shaping preamps\u003c\/strong\u003e with 60 dB of digitally controlled gain and switchable 48V phantom power on each channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree character modes per preamp:\u003c\/strong\u003e Warmth (based on the UA 610 tube preamp), Focus (American solid-state console) and Shine (British Class-A circuitry)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Processing:\u003c\/strong\u003e realtime compression in the unit with six push-button presets for vocals, guitar, bass and drums\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADAT or S\/PDIF optical input\u003c\/strong\u003e for up to 8 additional digital channels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStudio monitoring tools:\u003c\/strong\u003e Main\/Alt switching for two monitor pairs, a built-in talkback mic and two headphone outputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32-bit\/192 kHz conversion\u003c\/strong\u003e with MIDI In\/Out and an onboard USB hub\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe character modes and Max presets can be combined freely, giving more than 18 tonal options before anything reaches the DAW. Presets such as \"Rap Vocals\" and \"Jangly Acoustic\" are aimed at getting a usable, committed sound quickly, and a full-colour Smart Display shows inputs, levels, settings and gain-reduction metering. Auto-Gain and Clip Protection help set safe levels when tracking several performers at once.\u003c\/p\u003e\u003cp\u003eInputs cover four mic\/line combo jacks and two front-panel Hi-Z instrument inputs. On the monitoring side, the two headphone outputs (one 1\/4\" and one 1\/8\") share a single cue mix, and the rear also carries MIDI In and Out on 1\/8\" TRS (Type A) jacks. The USB hub can power a USB MIDI controller, and Loopback makes it straightforward to route computer audio into podcasts and streams.\u003c\/p\u003e\u003cp\u003eThe Volt 4P MAX is class compliant on Mac, iPad and iPhone, while Windows uses UA's ASIO driver installed through the UA Connect app. It works with the UAD Console app and LUNA for session recall and low-latency cue mixes, runs UAD Native plug-ins on the host computer without DSP hardware, and is compatible with all major DAWs including Ableton Live, Logic Pro, Pro Tools and FL Studio. The unit can run on USB bus power, with a separate USB-C power input for running all four preamps with phantom power at full capability.\u003c\/p\u003e","brand":"Universal Audio","offers":[{"title":"Default Title","offer_id":55245075448147,"sku":"VOLT4PMAX","price":499.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1043\/4052\/1299\/files\/volt-4p-max-gallery-1.png?v=1791382975"},{"product_id":"universal-audio-volt-4-gen-2","title":"Universal Audio Volt 4 Gen 2","description":"\u003cp\u003eThe Universal Audio Volt 4 Gen 2 is a 12-in\/6-out USB-C audio interface from UA's second-generation Volt range. It has two Tone Shaping mic preamps, 32-bit\/192 kHz conversion and connections for outboard gear, MIDI hardware and optical expansion. It suits home and mobile recording of vocals, instruments and synths, as well as podcasting and streaming.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTone Shaping preamps:\u003c\/strong\u003e two mic preamps with 60 dB of gain and three one-button modes: Warmth (inspired by the UA 610 tube preamp), Focus (modelled on a classic American solid-state console) and Shine (British Class-A circuitry)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpandable I\/O:\u003c\/strong\u003e two mic\/line combo inputs, two front-panel Hi-Z instrument inputs, line inputs and outputs 3–4, and an ADAT or S\/PDIF optical input for up to eight more channels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMIDI and USB hub:\u003c\/strong\u003e MIDI In and Out on 1\/8\" TRS (Type A), plus a USB-C hub port that can power a USB MIDI controller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmart Display:\u003c\/strong\u003e a full-colour screen showing inputs, levels and settings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecording aids:\u003c\/strong\u003e Auto-Gain for setting levels and Clip Protection for unexpected peaks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in loopback\u003c\/strong\u003e for podcasts, streams and video calls\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLine inputs and outputs 3–4 let you patch hardware processors into your recording chain or connect a line-level synth. Through the optical input, an ADAT preamp gives you eight extra channels at 44.1\/48 kHz, which makes the Volt 4 a practical base for recording drums or a band. Phantom power is switchable per channel, so you can run a condenser and a dynamic mic side by side.\u003c\/p\u003e\u003cp\u003eThe Volt 4 works with UAD Console and LUNA, with session recall and low-latency cue mixes. Plug-ins run natively on the host computer rather than on DSP hardware. The interface is USB bus-powered and class-compliant on Mac, iPad and iPhone. On Windows it uses the ASIO driver from the UA Connect app. For mobile rigs with more gear attached, there is a separate USB-C power input, and a rear-panel power switch.\u003c\/p\u003e\u003cp\u003eThe Volt 4 ships with the UAD Volt Studio Bundle, whose contents UA notes are subject to change. It currently includes LUNA Free, the UA 610 Collection, LA-2A and 1176 plug-ins, Pure Plate Reverb, Galaxy Tape Echo, the PolyMAX and Anthem synths and third-party extras such as Melodyne Essential. Compared with the Volt 4 Max, it has no compressor processing, no Main\/Alt speaker switching and a single headphone output.\u003c\/p\u003e","brand":"Universal Audio","offers":[{"title":"Default Title","offer_id":55245084590419,"sku":"VOLT4G2","price":279.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1043\/4052\/1299\/files\/volt-4-gen-2-gallery-1.png?v=1791382455"}],"url":"https:\/\/www.voltmusicstore.com\/collections\/uad-volt-gen-2.oembed","provider":"Volt Music Store","version":"1.0","type":"link"}