{"product_id":"511-mic-pre","title":"Rupert Neve Designs 511 500 Series Mic Preamp","description":"\u003cp\u003eThe Rupert Neve Designs 511 is a single-channel microphone preamp for 500 Series racks. It combines a stepped gain preamp with a sweepable high-pass filter and variable Silk saturation. It is aimed at engineers who record vocals, acoustic instruments, guitars, bass and drums through a 500 Series lunchbox or rack.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStepped gain:\u003c\/strong\u003e a 12-position switch covers 0 to 66 dB in 6 dB steps, with a continuously variable ±6 dB trim for fine adjustment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilk with Texture:\u003c\/strong\u003e Silk Red adds harmonics in the highs and upper mids. The Texture knob sets the amount, from barely there to heavier colour than RND's vintage units\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSweepable high-pass filter:\u003c\/strong\u003e 20 to 250 Hz at 12 dB\/octave for proximity effect, rumble, air-handling noise and hum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine-level capable:\u003c\/strong\u003e at unity gain it takes balanced inputs above +20 dBu without a pad, so you can run line sources through Silk\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetering and switching:\u003c\/strong\u003e an eight-segment LED output meter, an illuminated polarity button and switchable +48V phantom power from the rack\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe preamp circuit comes from RND's 517, the high-pass filter from the 5012 and the Silk circuit from the Portico II Channel. On the original Portico preamps Silk was a simple on\/off switch. On the 511 it works by reducing negative feedback around the output transformer and shaping that feedback's frequency response, and it is continuously variable. RND recommends it for vocals, strings, piano and other acoustic sources.\u003c\/p\u003e\u003cp\u003eThe input stage has no transformer. Because the input impedance is too low for high-impedance sources, the 511 is not meant as a DI for guitar or bass. RND points to its RNDI DI boxes or the 517 module for that job. When you connect line sources such as keyboards, switch off phantom power and turn the gain to zero first. The meter shows level before Silk, and its top red LED stays lit longer the further the signal has gone past clipping. The module is built to the 500 Series specification, so it also fits racks from other manufacturers.\u003c\/p\u003e","brand":"rupert-neve-designs","offers":[{"title":"Default Title","offer_id":55947150688595,"sku":"WRP511","price":899.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1043\/4052\/1299\/files\/511-white-square.webp?v=1794905748","url":"https:\/\/www.voltmusicstore.com\/products\/511-mic-pre","provider":"Volt Music Store","version":"1.0","type":"link"}