{"product_id":"id4","title":"Audient iD4+ MK3 Desktop Audio Interface","description":"\u003cp\u003eThe audient iD4+ is the largest model in the iD MK3 desktop range (it was previously known as the iD44). It is a 20-in\/24-out USB-C audio interface for engineers and producers who record several mics at once, use outboard gear, or want reliable monitoring in an untreated room.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Console Mic Preamps:\u003c\/strong\u003e discrete Class-A circuitry based on audient's ASP8024-HE console, with up to 75dB of gain and +48V phantom power on every input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalogue Tone Suite:\u003c\/strong\u003e HMX MOSFET saturation, LIFT high-frequency boost, GLOW (HMX and LIFT combined) and ORBIT switchable mic impedance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoomTune monitor correction:\u003c\/strong\u003e runs on the interface hardware, applies system-wide and comes with the factory-calibrated RM1 reference mic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid studio connectivity:\u003c\/strong\u003e two balanced hardware inserts, 16 channels of ADAT in and out, and wordclock out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZero-latency DSP:\u003c\/strong\u003e hardware EQ, compression and reverb with no load on the computer's CPU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C bus power:\u003c\/strong\u003e runs preamps, phantom power, both headphone amps and ADAT, with an ALT POWER port for weaker host ports\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOn the input side, Smartgain sets levels automatically. It can set all four preamps in one pass and match the gain of a stereo pair. With 75dB of gain on tap, low-output dynamic mics work without an inline booster. Two JFET instrument inputs on channels 1 and 2 are modelled on a valve amp input stage. They suit amp simulators, are clean enough for re-amping, and can take guitar and bass at the same time or a stereo keyboard. The inserts on channels 1 and 2 let you patch a compressor or EQ into the signal path. The insert returns can also act as line inputs that go straight to the converters, skipping the preamp. Conversion is 32-bit with a quoted 128dB dynamic range at sample rates up to 192kHz.\u003c\/p\u003e\u003cp\u003eORBIT uses relays to switch the mic input impedance between PUNCH (2.8kΩ), SMOOTH (1.2kΩ) and VINTAGE (220Ω), which changes how dynamic and ribbon mics respond. HMX, LIFT and GLOW add saturation and top-end sheen on the way in, before the converters.\u003c\/p\u003e\u003cp\u003eThe monitoring section is built for a working studio. It has two speaker outputs and two independent headphone amps fed from four Artist Mixes, and each headphone output has its own level and source. Hardware buttons cover Mute, Dim, speaker switching and Talkback, and an assignable button gives Mono, Reference Level or M\/S. RoomTune setup is guided and takes under 20 minutes. The iD Control software adds Total Recall of gain, tone and routing, talkback through the computer's built-in mic, loop-back on inputs 21\/22 and a standalone mode.\u003c\/p\u003e\u003cp\u003eThe iD4+ works without drivers on macOS 12 or later and iPad\/iPhone, and also supports Windows 10\/11. It is housed in a metal chassis with a stepped encoder and backlit meters and switches. The box contains the interface, a 1m USB-C cable and the RM1 mic with clip.\u003c\/p\u003e","brand":"audient","offers":[{"title":"Default Title","offer_id":55947370987859,"sku":"APACAU63-iD4+","price":629.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1043\/4052\/1299\/files\/audient_id4plus_1.jpg?v=1794906158","url":"https:\/\/www.voltmusicstore.com\/products\/id4","provider":"Volt Music Store","version":"1.0","type":"link"}