Fysieke winkels in Riga en Rotterdam
Internationale verzending
10+ betalingsmogelijkheden
Toegevoegd aan winkelwagen
Bewerk winkelmandje Ga verder met winkelen
Adam Audio

S6X

€19.389,00
Op voorraad
Verplichte velden:
    - +
    Fysieke winkels in Riga en Rotterdam
    Internationale verzending
    10+ betalingsmogelijkheden
    Beschrijving S6X

    The S6X main monitor is designed for large control rooms and film studios. It uses a symmetrical concept to increase the realistic reproduction of ADAM Audio monitors to higher sound pressure levels. ADAM Audio has avoided the typical overloading of the bass range that can often be found in main monitors. A wide horizontal radiation characteristic and moderate vertical beaming are crucial factors to minimize the impact of ceiling and floor reflections and achieve neutral sound reproduction at high volumes.

     

    Extended D’Appolito design

    A total of seven individual speakers were arrayed so that gradual transitions could be made possible given the size of the cabinet. In addition, we chose a horizontal symmetry that can be described as an extended D’Appolito configuration. This kind of design combined with suitable transition frequencies and filter slopes results in radiation patterns that lead to very consistent reproduction characteristics in the horizontal center position. At the same time, vertical dispersion is reduced so that reflections from the ceiling, floor or mixing console are greatly reduced. Thus, so called ‘early reflections’ have less chance to interfere, which leads to significantly better stereo imaging and a more three-dimensional sound.

     

    Impulse Coupling

    Further progress in development was achieved by the use of Alucore® panels, an extra firm component material with an aluminum honeycomb core. All drivers of the S6X and S7A Mk2 are mounted on such panels, which considerably improves mechanical coupling between the drivers and the cabinet.

     

    The S6X: accuracy and power

    A number of innovative approaches in conjunction with uncompromising effort in all sonically relevant areas make the S6X one of the largest and most sophisticated active monitors currently available. The horizontal symmetry design is conscious of harmonic and generous diaphragm area proportions to achieve not only a flat frequency response, but also a consistent dynamic behavior within the entire frequency range. Complex orchestral structures can be easily analyzed and spatially arranged on the S6X. Extensive control options on the front panel allow for adjusting to different acoustic situations or personal taste.

     

    Amplification

    The built-in amplifiers are coupled to the respective drivers as directly as possible so that remote amplifier units do not compromise the advantages of active technology. One 500 Watt amplifier is assigned to each of the 12″ woofers, while 250 Watt units are used the other bands of the frequency range. This main monitor combines very high accuracy exceptional power: SPL peaks far beyond 130 dB are produced without any compression or harshness. The S6X is an excellent choice for large control rooms and film or sound studios.

     

    Control panel

    In addition to the input sensitivity that can be adapted in the range of ±10 dB, there are four other level controls that affect the individual amplifier modules. Shelving filters at both ends of the frequency spectrum and three fully parametric equalizers help compensate for standing waves in the control room. The EQs can be inserted separately or grouped so their effect can be directly evaluated.

     

    TECHNICAL DATA

     

    WOOFER

    • Number - 2
    • Basket Ø 12" (305 mm)
    • Voice Coil Ø 3" (75 mm)
    • Cone Material HexaCone

    MIDRANGE (CONE)

    • Number - 2
    • Basket Ø 7.5" (186 mm)
    • Voice Coil Ø 2" (50 mm)
    • Cone Material HexaCone

    MIDRANGE

    • Number - 2
    • Type X-ART
    • Diaphragm Area 2 x 26 inch² (16800 mm²)
    • Equiv. Diaphragm Ø 2 x 5.5" (146 mm)
    • Velocity Transform Ratio 3.5:1
    • Diaphragm Weight 0.7 g

    TWEETER

    • Number - 1
    • Type X-ART
    • Diaphragm Area 4 inch² (2420 mm²)
    • Equiv. Diaphragm Ø 2" (56 mm)
    • Velocity Transform Ratio 4:1
    • Diaphragm Weight 0.17 g

    BUILT-IN AMPLIFIERS

    Woofer - 2
    Type - PWM
    Amp. Power - RMS / Music 500 W / 700 W

    Midrange (cone) - 2
    Type - PWM
    Amp. Power - RMS / Music 250 W / 350 W

    Midrange - 2
    Type - PWM
    Amp. Power - RMS / Music 250 W / 350 W

    Tweeter - 1
    Type - PWM
    Amp. Power - RMS / Music 250 W / 350 W

     

    CONTROL PANEL

    Input Sensitivity ±10 dB
    EQ 80 Hz (Q / Hz / Level) 3 x 0.2 - 20 / 20 - 200 / ±12 dB
    High Shelf EQ > 6 kHz ±6 dB
    Low Shelf EQ < 150 Hz ±6 dB
    Sub Gain ±4 dB
    Mid-Woofer Level ±2 dB
    Mid Level ±2 dB
    Tweeter Gain ±4 dB

     

    INPUT CONNECTORS

    Analog XLR

     

    GENERAL DATA

    Panel - Front
    X-Curve Filter - Yes
    Frequency Response - 23 Hz - 50 kHz
    THD 90 dB / 1 m > 100 Hz ≤0.5 %
    Max. SPL with sine wave acoustic - 100 Hz to 3 kHz at 1 m ≥123 dB
    Max. SPL per pair at 1 m ≥133 dB
    Crossover Frequencies - 85 / 800 / 3100 Hz
    Input Impedance - 10 kOhm
    Weight - 213.8 lb (97 kg)
    Magnetically Shielded - No
    Height x Width x Depth - 28.5" (720 mm) x 37" (940 mm) x 19.5" (490 mm)
    Warranty - 5 years (2 years warranty plus 3 years optional with product registration)
    Delivery Contents - Power cord, manual


    More info: S6X

    Kunnen wij helpen?
    Bel ons +31648053200
    Stuur ons een e-mail [email protected]
    Zend ons een bericht +31648053200
    1494 customers give us a 9.8 at Feedback-company
    Categorieën
    Modulaire Instrumenten Studio DJ Hi-Fi PA Accessoires Sale Klantenservice Mijn account EURGBPUSDCHFCZKDKKNOKPLNSEK Nederlands Deutsch English