Fysieke winkels in Riga en Rotterdam
Wereldwijde verzending
10+ Betalingsmogelijkheden
Toegevoegd aan winkelwagen
Ga naar winkelwagen Ga verder met winkelen


Op voorraad(Magazijn): Dit artikel wordt doorgaans binnen 7-14 werkdagen verzonden! Neem voor meer informatie contact met ons op via e-mail: [email protected]
Verplichte velden:
    - +
    Fysieke winkels in Riga en Rotterdam
    Wereldwijde verzending
    10+ Betalingsmogelijkheden
    Beschrijving AIR18s


    Designed to complement any full-range PA loudspeaker, and a perfect companion for the PreSonus® AIR-series, the AIR18s active subwoofer delivers a powerful, clear and accurate low-end punch. With its 18-inch low-frequency transducer, driven by 1,200 watts (peak) of Class D power, it provides plenty of detailed bottom end, all the way down to 30 Hz.

    Despite its power, the AIR18s is portable, compact and lightweight, with a rugged, tour-grade birch enclosure. It’s easy to transport and suitable for mobile applications, as well as installs, with integrated provisions for the included caster kit, ground-stacking provisions and ergonomic handles on both sides.

    AIR-series subwoofers feature easy-to-use controls and signal-processing presets. Set them for normal front-of-house use or boost the low-end with the Mo’ Bass preset. Reverse polarity, use the lowpass filter to set a crossover frequency, adjust the power amp’s master output level, even turn the grille LED off for installs — all at the touch of a button. A variable alignment delay properly aligns your three-way system.

    Most subwoofers are essentially omnidirectional, which can cause feedback onstage and make monitoring difficult. Creating a subwoofer array helps keep excess energy off of the stage and in the audience. AIR-series subwoofers provide the tools you need to create these arrays with ease.



    • 18-inch low-frequency driver with a 3-inch voice coil
    • 1,200W (peak) Class D power amp
    • Maximum SPL 129 dB peak with 30 Hz to 150 Hz frequency response
    • 2 combo XLR and ¼-inch line inputs and two XLR direct outputs
    • Easy-to-use DSP performance presets: Normal (typical FOH use) and Mo’ Bass (extended low-end performance)
    • Locate adjustment presets: Normal (non-arrayed), Cardioid (ground-stacked cardioid array) and Endfire (endfire cardioid array)
    • Fully variable lowpass filter (sets the crossover point) with presets for AIR15, AIR12 and AIR10
    • Alignment delay (adds delay time relative to full-range speaker) and Polarity switch (inverts the summed input signal)
    • 2 comfortable ergonomic side handles, ground-stack provisions, caster provisions (caster kit included) and defeatable front-panel LED
    • Rugged, texture-painted, birch enclosure with tour-grade, 17 gauge steel grille


    Two - 2 x XLR/TRS Line Combo
    One - 1 x XLR Link Out
    220-240V EU
    5.3A (230V-50 Hz), 10.6A (120V)


    129 dB
    1200W Dynamic (600W Continuous)


    Active Vented Design


    15mm Plywood
    2 Side
    1.5 mm Steel
    Ground-Stack Provisions
    Kunnen wij helpen?
    Bel ons +31648053200
    Stuur ons een e-mail [email protected]
    Zend ons een bericht +31648053200
    1579 customers give us a 9.8 at Feedback-company
    Modulaire Instrumenten Studio DJ Hi-Fi PA Accessoires Sale Klantenservice Mijn account EURGBPUSDCHFCZKDKKNOKPLNSEK Nederlands Deutsch English