The audient iD1 is a compact 2-in/2-out USB-C desktop audio interface for solo musicians, singer-songwriters and producers who record one source at a time. It is bus-powered, runs on Mac, Windows and iPad/iPhone, and pairs a single Audient console mic preamp with a JFET instrument input, hardware DSP and RoomTune monitor correction. Audient's own page lists it as the iD1 MK3, formerly the iD4.
-
Audient Console Mic Preamp: discrete Class-A design taken from the ASP8024-HE console, with 75dB of clean gain for dynamic mics such as the SM7B without an inline booster.
-
Analogue Tone Suite and ORBIT: HMX, LIFT and GLOW shape the preamp before conversion, and relay-switched input impedance offers PUNCH, SMOOTH and VINTAGE settings.
-
JFET Instrument Input: modelled on a valve amp input stage for use with amp simulators, recordable on its own track alongside the mic and clean enough for later re-amping.
-
RoomTune Monitor Correction: runs on the hardware with no CPU cost and applies system-wide, with up to 32 stored profiles.
-
Zero-latency DSP: EQ, compression and reverb handled on the unit, controlled from iD Control.
-
32-bit conversion: up to 192kHz, with 128dB dynamic range on the outputs.
Setting levels is quick: press Smartgain, play or sing your loudest part and the iD1 sets the input gain for you. The tone options sit on the analogue side of the signal path, so HMX adds warmth through a discrete MOSFET circuit, LIFT adds high-frequency sheen and GLOW combines the two before anything reaches the DAW. ORBIT changes how the preamp loads the microphone, from 2.8kΩ down to 220Ω, which alters the character of dynamic and ribbon mics.
For monitoring, the iD1 has a stereo monitor output and a dual headphone output with both 6.3mm and 3.5mm jacks. A Direct Monitor button and the main encoder let you blend input and playback for latency-free tracking. In iD Control you get total recall, Mute, Dim, Mono and Polarity Invert on the monitors, loopback on inputs 3 and 4 for streaming and capture, and a standalone mode that keeps settings stored on the hardware.
RoomTune uses a guided setup that takes under 20 minutes to calibrate your speakers to the room. Because correction runs inside the interface, it applies to your DAW, streaming apps and the whole operating system. It requires Audient's RM1 Reference Microphone, which is not included with the iD1.
The unit is built around a metal chassis with a stepped encoder and back-lit meters and switches. It works class-compliant on iPad and iPhone, supports macOS 12 or later and Windows 10 and 11, and comes with a 1m USB-C cable plus the ARC software bundle on registration.