Prices include 21% VAT based on your delivery country (Netherlands).
Price without VAT: €990,91
EU businesses outside the Netherlands can purchase with 0% VAT using a valid EU VAT number.
VAT is automatically removed after VAT validation during checkout.
Available from our supplier’s warehouse. The current estimated delivery window is shown above. Timing depends on supplier availability and your destination.
Eligible unused products can be returned within 14 days of delivery, complete with accessories and original packaging. Contact us before returning an item. Some exclusions apply, including opened software and custom orders.
Reliable and trackable delivery with leading carriers.
All new products include a 2-year warranty.
If you experience a fault, contact our team with your order number and a description of the issue. We’ll help troubleshoot the problem and, where necessary, arrange a repair, replacement or warranty claim.
The warranty does not cover accidental damage, misuse, normal wear and tear, incorrect installation or unauthorised repairs.
Real feedback from verified Volt Music Store customers
| Description |
| Price |
| Brand |
| Type |
| Product variants |
| The Adam Audio Sub10 PRO is a powered studio subwoofer with a single 10" woofer and onboard DSP. It extends the low end of stereo 2.1, multichannel and immersive monitoring setups such as Dolby Atmos rooms, and its cabinet is sized to fit under desks and consoles. It is built to work with ADAM Control software and ADAM's A Series monitors.
In Stereo mode the Sub10 PRO handles bass management itself, with crossover points at 70, 85, 100 and 115 Hz; 85 Hz is the suggested starting point. LFE mode takes the right input and keeps the low-passed signal from the outputs, while Wide mode lets the sub play its full 21 to 300 Hz range when bass management happens elsewhere in the chain. A Bypass function removes the sub and sends full-range signal to the monitors, and it can be operated with a latching footswitch on the 6.3 mm Bypass jack for quick A/B checks. Phase can be set on the rear panel from 0° to −315° in 45° steps, with a long press for a 180° flip. For finer alignment, ADAM Control (Mac/PC) offers more precise phase and up to 10 ms of delay, and can identify, rename and map several subs and A Series monitors so the whole system can be adjusted from the listening position. When ADAM Control takes over, the matching hardware controls are disabled. Settings, including imported SoundID calibration filters, are stored in the DSP and keep working without a computer connected. The DSP runs at 96 kHz with 24-bit conversion, and separate peak and thermal limiters plus over-current, over-temperature and under-voltage protection guard the driver and amplifier. The braced MDF cabinet has a vinyl finish, a painted MDF front panel and a steel grille. | Regular price
Sale price
€1.199,00
Regular price
| Adam Audio | Studio Subwoofers |
Prices include 21% VAT based on your delivery country (Netherlands).
Price without VAT: €990,91
EU businesses outside the Netherlands can purchase with 0% VAT using a valid EU VAT number.
VAT is automatically removed after VAT validation during checkout.
The Adam Audio Sub10 PRO is a powered studio subwoofer with a single 10" woofer and onboard DSP. It extends the low end of stereo 2.1, multichannel and immersive monitoring setups such as Dolby Atmos rooms, and its cabinet is sized to fit under desks and consoles. It is built to work with ADAM Control software and ADAM's A Series monitors.
In Stereo mode the Sub10 PRO handles bass management itself, with crossover points at 70, 85, 100 and 115 Hz; 85 Hz is the suggested starting point. LFE mode takes the right input and keeps the low-passed signal from the outputs, while Wide mode lets the sub play its full 21 to 300 Hz range when bass management happens elsewhere in the chain. A Bypass function removes the sub and sends full-range signal to the monitors, and it can be operated with a latching footswitch on the 6.3 mm Bypass jack for quick A/B checks.
Phase can be set on the rear panel from 0° to −315° in 45° steps, with a long press for a 180° flip. For finer alignment, ADAM Control (Mac/PC) offers more precise phase and up to 10 ms of delay, and can identify, rename and map several subs and A Series monitors so the whole system can be adjusted from the listening position. When ADAM Control takes over, the matching hardware controls are disabled. Settings, including imported SoundID calibration filters, are stored in the DSP and keep working without a computer connected.
The DSP runs at 96 kHz with 24-bit conversion, and separate peak and thermal limiters plus over-current, over-temperature and under-voltage protection guard the driver and amplifier. The braced MDF cabinet has a vinyl finish, a painted MDF front panel and a steel grille.
