The Audient iD2 is a third-generation desktop USB-C audio interface with 10 inputs and 6 outputs. It replaces the iD14 in Audient's line-up and is aimed at home producers stepping up from entry-level gear who want strong preamps, onboard processing and room correction in a compact, bus-powered unit for Mac, Windows, iPad and iPhone.
-
Two Console Mic Preamps: discrete Class-A design that Audient bases on its ASP8024-HE console, with 0 to 75dB of gain for dynamic mics such as the SM7B without an inline booster
-
Analogue Tone Suite: HMX MOSFET saturation, LIFT high-frequency sheen, GLOW (the two combined) and ORBIT relay-switched mic impedance with PUNCH, SMOOTH and VINTAGE settings
-
RoomTune monitor correction: runs on the hardware with no CPU load and applies system-wide; requires the Audient RM1 Reference Microphone, sold separately
-
Zero-latency DSP: EQ and compression on the mic/line inputs plus reverb for headphone monitoring
-
JFET instrument input: front-panel DI modelled on a valve amp input stage, clean enough for later re-amping
-
Expandable I/O: optical input for 8 extra channels via ADAT, 32-bit conversion and dual headphone outputs on 6.3mm and 3.5mm jacks
Smartgain takes the guesswork out of level setting: play or sing the loudest part and the iD2 sets the gain, with the option to match both channels as a stereo pair. Because the Tone Suite works in the analogue domain, the character you dial in is printed before the signal reaches your DAW.
RoomTune walks you through a guided setup that takes under 20 minutes and keeps one active correction profile each for the Main and Alt speaker outputs. Since the correction runs on the interface itself, it applies to everything you play through the computer, from the DAW to streaming apps.
The iD Control software handles recall of gain, Tone Suite and routing, two artist headphone mixes and a full set of monitor controls including Alt Speaker, Mute, Dim, Mono, Reference Level and M/S mode. Talkback uses the computer's microphone, loopback appears on inputs 11 and 12, and a standalone mode keeps settings stored on the hardware. On the unit, a stepped encoder, back-lit meters and a direct monitor button with input/playback blend sit in a metal chassis.
The iD2 is powered over USB-C, with an ALT POWER port for computers that cannot supply enough bus power. It runs class-compliant on iPad and iPhone and works with all major DAWs.