The iD2+ is Audient's third-generation (MK3) desktop audio interface, previously known as the iD24. It offers 10 inputs and 14 outputs over USB-C and is built for producers putting together a serious home or project studio around two mic channels, monitors and outboard gear.
-
Two Audient Console Mic Preamps: discrete Class-A design taken from the ASP8024-HE console, with up to 75dB of gain, enough for low-output dynamics like an SM7B without a booster.
-
Smartgain and Analogue Tone Suite: automatic input level setting plus HMX, LIFT, GLOW and the relay-based ORBIT variable mic impedance.
-
RoomTune monitor correction: runs on the hardware with no CPU load and applies system-wide, with the RM1 reference mic included.
-
Balanced hardware inserts: send and return jacks on channels 1 and 2 for recording through outboard processors.
-
Zero-latency onboard DSP: EQ and compression on the mic/line inputs, plus reverb for the cue mix.
-
Expandable I/O: 8 channels of ADAT in and out, word clock output, two stereo speaker outputs and dual headphone outputs.
On the input side, the preamps are joined by a front-panel JFET instrument input modelled on a valve amp input stage, which suits players who track guitar into amp simulators. Smartgain listens while you play and sets the level for you, and can match channels 1 and 2 when recording a stereo pair. The Analogue Tone Suite adds colour before conversion: HMX uses a discrete MOSFET circuit for warmth, LIFT opens up the top end, GLOW combines the two, and ORBIT switches the mic input impedance between PUNCH (2.8kΩ), SMOOTH (1.2kΩ) and VINTAGE (220Ω) settings.
The insert returns double as line inputs that bypass the preamp, so a hardware compressor or EQ can sit directly in the recording chain. Conversion is 32-bit at up to 192kHz, and the onboard EQ and compression can be used at sample rates up to 96kHz.
For monitoring, the iD2+ works as a small control centre. There are hardware buttons for Mute, Dim, speaker switching and Talkback, an assignable function button for Mono, Reference Level or M/S, and metering for inputs and outputs. RoomTune's guided setup takes under 20 minutes, and separate calibrations can be stored for the main and alternate monitor pairs, switched with the ALT button.
The iD Control software provides total recall, two Artist Mixes, talkback through the computer's microphone, loopback on inputs 11 and 12, and a standalone mode that keeps settings on the hardware. The unit has a metal chassis, a stepped encoder and back-lit meters and switches. It runs on USB-C bus power, with an ALT POWER port for computers that cannot supply enough current, and works with macOS 12 or later, Windows 10 and 11, and driverless with iPad and iPhone.